JH-B1 Blister forming and automated packing machine
The JH-B1 blister forming and automatic packing machine adopts the latest high-tech design that allows the cost of the servo to be affordable, with inexpensive supplies, low operating cost, yet with a maximum cost-return ratio. The automated precision tablet/capsule download system and automated screening system allow the servo to operate round-the-clock, while manned by only one operator.
The JH-B1 servo is compatible for PTP packing of tablets, sugar-coated/membrane-coated tablets, hard capsules, and soft capsules.
Its feature is as follows
1.
The servo operates on a continuous rotation motion of a non-interrupted repetitive motion to be free of impact, noise, and runs smoothly.
2.
Option to incorporate row-wide perforation in tablet packing.
3.
Comes with Teflon plated heating board and contact heated PVC membrane to allow a lower heating temperature, optimal even heating, and stable rotation speed.
4.
The servo housing is built of SUS 304 stainless steel and is guaranteed to meet G.M.P. demand criteria.
5.
A diagonal trim-off method that does not create intermittent material waste to help conserve at least 6% in packaging cost.
6.
The status monitor prompts causes leading to servo pauses, i.e. low PVC foil, heater malfunction, etc.
7.
Mold adjustment and prepping guaranteed to be less than one hour, including servo mold change, cleaning and adjustment.
Product specification
Cycle timing
maximum rotation speed at 40 cycles per minute.
PVC capacity
maximum up to130mm in width and 350 micron in thickness
Area of each blister formed
Maximum up to 115*65mm.
Depth of draw
Standard hole depth at 12mm.
Dimensions
Dimensions
2150mm in length, 1800mm in height, 1150 in width
Weight
950kg
Power rating
220/240V, 3§, 50/60 Hz
Power consumption
4.2kw Air: 200L/min at 5 kg/cm
The servo’s main components comprised of
BLISTER PACKING MACHINE
Equipment mount: for the mechanical transmission mechanism and pneumatic pressure transmission mechanism
Packing material feeding system and material dispensing wheel
Manual material unloading panel
Aluminum foil feeding system
Line cutting station
Vibrating material unloading system/automated capsule sorting and unlading system
Control panel and monitoring system
PVC preheating panel
Heat forming system (pressurized air forming)
Heat sealing system, typeset/lot number imprint mechanism
Complete product counter, trim-off mold, PID temperature controller
